lagrange_polynomial#

This module contains the LagrangePolynomial class.

The LagrangePolynomial class is a concrete implementation of the abstract base class MultivariatePolynomialSingleABC for polynomials in the Lagrange basis.

Background information#

The relevant section of the documentation on Lagrange basis contains a more detailed explanation regarding the polynomials in the Lagrange form.

Implementation details#

LagrangePolynomial is currently designed to be a bare concrete implementation of the abstract base class MultivariatePolynomialSingleABC. In other words, most (if not all) concrete implementation of the abstract methods are left undefined and will raise an exception when called or invoked.

LagrangePolynomial serves as an entry point to Minterpy polynomials especially in the context of function approximations because the intuitiveness of the corresponding coefficients (i.e., they are the function values at the grid points). However, the polynomial itself is not fully featured (e.g., no addition, multiplication, etc.) as compared to polynomials in the other basis.

class minterpy.polynomials.lagrange_polynomial.LagrangePolynomial(multi_index, coeffs=None, internal_domain=None, user_domain=None, grid=None)[source]#

Bases: MultivariatePolynomialSingleABC

Concrete implementation of polynomials in the Lagrange basis.

A polynomial in the Lagrange basis is the sum of so-called Lagrange polynomials, each of which is multiplied with a coefficient.

The value a single Lagrange monomial is per definition \(1\) at one of the grid points and \(0\) on all the other points.

Notes

The Lagrange polynomials commonly appear in the Wikipedia article is in Minterpy considered the “monomial”. In other words, a polynomial in the Lagrange basis is the sum of Lagrange monomials each of which is multiplied with a coefficient.
A polynomial in the Lagrange basis may also be defined also for multi-indices of exponents which are not downward-closed. In such cases, the corresponding Lagrange monomials also form a basis. These mononomials still possess their special property of being \(1\) at a single grid point and \(0\) at all the other points, with respect to the given grid.

Properties

`coeffs`	The coefficients of the polynomial(s).
`num_active_monomials`	The number of active monomials of the polynomial(s).
`spatial_dimension`	Spatial dimension.
`unisolvent_nodes`	Unisolvent nodes the polynomial(s) is(are) defined on.

Methods

`add_points`(exponents)	Extend `grid` and `multi_index`
`diff`(order, **kwargs)	Return the partial derivative poly.
`expand_dim`(target_dimension[, ...])	Expand the spatial dimension of the polynomial instance.
`from_degree`(spatial_dimension, poly_degree, ...)	Initialise Polynomial from given coefficients and the default construction for given polynomial degree, spatial dimension and \(l_p\) degree.
`from_grid`(grid[, coeffs, internal_domain, ...])	Create an instance of polynomial with a Grid instance.
`from_poly`(polynomial[, new_coeffs])	constructs a new polynomial instance based on the properties of an input polynomial
`generate_internal_domain`(domain, ...)	Building and verification of domains.
`generate_user_domain`(domain, spatial_dimension)	Building and verification of domains.
`has_matching_dimension`(other)	Return `True` if the polynomials have matching dimensions.
`has_matching_domain`(other[, tol])	Return `True` if the polynomials have matching domains.
`integrate_over`([bounds])	Compute the definite integral of the polynomial over the bounds.
`make_complete`()	returns a possibly new polynomial instance with a complete multi index set.
`partial_diff`(dim[, order])	Return the partial derivative poly.

Parameters:

multi_index (MultiIndexSet | ndarray)
coeffs (ndarray | None)
internal_domain (ndarray | None)
user_domain (ndarray | None)
grid (Grid)

static _eval(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _add(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _sub(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _mul(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _div(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _pow(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _scalar_add(poly, scalar)#

Add an instance of polynomial in the Lagrange basis with a real scalar.

This is the concrete implementation of _scalar_add method in the MultivariatePolynomialSingleABC for handling expressions like poly + x, where x is a real scalar number and poly is an instance of LagrangePolynomial.

Parameters:

poly (LagrangePolynomial) – A polynomial instance in the Lagrange basis to be added with a scalar.
scalar (SCALAR) – The real scalar number to be added to the polynomial instance.

Returns:

The summed polynomial in the Lagrange basis; the polynomial is a new instance.

Return type:

LagrangePolynomial

static _partial_diff(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _diff(*args, **kwargs)#

A placeholder function to indicate a feature that is not supported.

Warning

This feature is not implemented yet!

Raises:: NotImplementedError – Any time this function or method is called.
Return type:: None

static _integrate_over(poly, bounds)#

Compute the definite integral of a polynomial in the Lagrange basis.

Parameters:

poly (LagrangePolynomial) – The polynomial of which the integration is carried out.
bounds (numpy.ndarray) – The bounds (lower and upper) of the definite integration, an (M, 2) array, where M is the number of spatial dimensions.

Returns:

The integral value of the polynomial over the given domain.

Return type:

numpy.ndarray

static generate_internal_domain(domain, spatial_dimension)#

Building and verification of domains.

This function builds a suitable domain as the cartesian product of a one- dimensional domain, or verifies the domain shape, of a multivariate domain is passed. If None is passed, the default domain is build from [-1,1].

Parameters:

domain (array_like, None) – Either one-dimensional domain (min,max), or a stack of domains for each domain with shape (spatial_dimension,2). If None is passed, the DEFAULT_DOMAIN is repeated for each spatial dimentsion.
spatial_dimension (int) – Dimentsion of the domain space.

Return verified_domain:

Stack of domains for each dimension with shape (spatial_dimension,2).

Return type:

np.ndarray

Raises:

ValueError – If no domain with the expected shape can be constructed from the input.

static generate_user_domain(domain, spatial_dimension)#

Building and verification of domains.

This function builds a suitable domain as the cartesian product of a one- dimensional domain, or verifies the domain shape, of a multivariate domain is passed. If None is passed, the default domain is build from [-1,1].

Parameters:

domain (array_like, None) – Either one-dimensional domain (min,max), or a stack of domains for each domain with shape (spatial_dimension,2). If None is passed, the DEFAULT_DOMAIN is repeated for each spatial dimentsion.
spatial_dimension (int) – Dimentsion of the domain space.

Return verified_domain:

Stack of domains for each dimension with shape (spatial_dimension,2).

Return type:

np.ndarray

Raises:

ValueError – If no domain with the expected shape can be constructed from the input.

__add__(other)#

Add the polynomial(s) with another polynomial(s) or a real scalar.

This function is called when:

two polynomials are added: P1 + P2, where P1 (i.e., self) and P2 (other) are both instances of a concrete polynomial class.
a polynomial is added with a real scalar number: P1 + a, where a (other) is a real scalar number.

Polynomials are closed under scalar addition, meaning that the result of the addition is also a polynomial with the same underlying multi-index set; only the coefficients are altered.

Parameters:: other (Union[MultivariatePolynomialSingleABC, SCALAR]) – The right operand, either an instance of polynomial (of the same concrete class as the right operand) or a real scalar number.
Returns:: The result of the addition, an instance of summed polynomial.
Return type:: MultivariatePolynomialSingleABC

Notes

The concrete implementation of polynomial-polynomial and polynomial- scalar addition is delegated to the respective polynomial concrete class.

__call__(xx, **kwargs)#

Evaluate the polynomial on a set of query points.

The function is called when an instance of a polynomial is called with a set of query points, i.e., \(p(\mathbf{X})\) where \(\mathbf{X}\) is a matrix of values with \(k\) rows and each row is of length \(m\) (i.e., a point in \(m\)-dimensional space).

Parameters:

xx (numpy.ndarray) – The set of query points to evaluate as a two-dimensional array of shape (k, m) where k is the number of query points and m is the spatial dimension of the polynomial.
**kwargs – Additional keyword-only arguments that change the behavior of the underlying evaluation (see the concrete implementation).

Returns:

The values of the polynomial evaluated at query points.

If there is only a single polynomial (i.e., a single set of coefficients), then a one-dimensional array of length k is returned.
If there are multiple polynomials (i.e., multiple sets of coefficients), then a two-dimensional array of shape (k, np) is returned where np is the number of coefficient sets.

Return type:

numpy.ndarray

Notes

The function calls the concrete implementation of the static method _eval().

See also

_eval: The underlying static method to evaluate the polynomial(s) instance on a set of query points.

__copy__()#

Creates of a shallow copy.

This function is called, if one uses the top-level function copy() on an instance of this class.

Returns:: The copy of the current instance.
Return type:: MultivariatePolynomialSingleABC

See also

copy.copy: copy operator form the python standard library.

__deepcopy__(mem)#

Creates of a deepcopy.

This function is called, if one uses the top-level function deepcopy() on an instance of this class.

Returns:: The deepcopy of the current instance.
Return type:: MultivariatePolynomialSingleABC

See also

copy.deepcopy: copy operator form the python standard library.

__eq__(other)#

Compare two concrete polynomial instances for exact equality.

Two polynomial instances are equal if and only if:

both are of the same concrete class, and
the underlying multi-index sets are equal, and
the underlying grid instances are equal, and
the coefficients of the polynomials are equal.

Parameters:: other (MultivariatePolynomialSingleABC) – Another instance of concrete implementation of MultivariatePolynomialSingleABC to compare with
Returns:: True if the current instance is equal to the other instance, False otherwise.
Return type:: bool

__floordiv__(other)#

Divide an instance of polynomial with a real scalar number (//).

Parameters:: other (Union[MultivariatePolynomialSingleABC, SCALAR]) – The right operand of the (floor) division expression, a real scalar number.
Returns:: An instance of polynomial, the result of (floor) scalar division of a polynomial.
Return type:: MultivariatePolynomialSingleABC

__hash__ = None#

__init__(multi_index, coeffs=None, internal_domain=None, user_domain=None, grid=None)#

Parameters:

multi_index (MultiIndexSet | ndarray)
coeffs (ndarray | None)
internal_domain (ndarray | None)
user_domain (ndarray | None)
grid (Grid | None)

__len__()#

Return the number of polynomials in the instance.

Returns:: The number of polynomial in the instance. A single instance of polynomial may contain multiple polynomials with different coefficient values but sharing the same underlying multi-index set and grid.
Return type:: int

__mul__(other)#

Multiply the polynomial(s) with another polynomial or a real scalar.

This function is called when:

two polynomials are multiplied: P1 * P2, where P1 and P2 are both instances of a concrete polynomial class.
a polynomial is multiplied with a real scalar number: P1 * a, where a is a real scalar number.

Polynomials are closed under scalar multiplication, meaning that the result of the multiplication is also a polynomial with the same underlying multi-index set; only the coefficients are altered.

Parameters:: other (Union[MultivariatePolynomialSingleABC, SCALAR]) – The right operand, either an instance of polynomial (of the same concrete class as the right operand) or a real scalar number.
Returns:: The result of the multiplication, an instance of multiplied polynomial.
Return type:: MultivariatePolynomialSingleABC

Notes

The concrete implementation of polynomial-polynomial multiplication is delegated to the respective polynomial concrete class.

__neg__()#

Negate the polynomial(s) instance.

This function is called when a polynomial is negated via the - operator, e.g., -P.

Returns:: New polynomial(s) instance with negated coefficients.
Return type:: MultivariatePolynomialSingleABC

Notes

The resulting polynomial is a deep copy of the original polynomial.
-P is not the same as -1 * P, the latter of which is a scalar multiplication. In this case, however, the result is the same; it returns a new instance with negated coefficients.

__pos__()#

Plus sign the polynomial(s) instance.

This function is called when a polynomial is plus signed via the + operator, e.g., +P.

Returns:: The same polynomial
Return type:: MultivariatePolynomialSingleABC

Notes

+P is not the same as 1 * P, the latter of which is a scalar multiplication. In this case, the result actually differs because the scalar multiplication 1 * P returns a new instance of polynomial even though the coefficients are not altered.

__pow__(power)#

Take the polynomial instance to the given power.

Parameters:: power (int) – The power in the exponentiation expression; the value must be a non-negative real scalar whole number. The value may not strictly be an integer as long as it is a whole number (e.g., \(2.0\) is acceptable).
Returns:: The result of exponentiation, an instance of a concrete polynomial class.
Return type:: MultivariatePolynomialSingleABC

Notes

Exponentiation by zero returns a constant polynomial whose coefficients are zero except for the constant term with respect to the multi-index set which is given a value of \(1.0\). In the case of polynomials in the Lagrange basis whose no constant term with respect to the multi-index set, all coefficients are set to \(1.0\).

__radd__(other)#

Right-sided addition of the polynomial(s) with a real scalar number.

This function is called for the expression a + P where a and P is a real scalar number and an instance of polynomial, respectively.

Parameters:: other (SCALAR) – A real scalar number (the left operand) to be added to the polynomial.
Returns:: The result of adding the scalar value to the polynomial.
Return type:: MultivariatePolynomialSingleABC

Notes

If the left operand is not a real scalar number, the right-sided addition is not explicitly supported, and it will rely on the __add__() method of the left operand.

__rmul__(other)#

Right sided multiplication of the polynomial(s) with a real scalar.

This function is called if a real scalar number is multiplied with a polynomial like a * P where a and P are a scalar and a polynomial instance, respectively.

Parameters:: other (SCALAR) – The left operand, a real scalar number.
Returns:: The result of the multiplication, an instance of multiplied polynomial.
Return type:: MultivariatePolynomialSingleABC

__rsub__(other)#

Right-sided subtraction of the polynomial(s) with a real scalar.

This function is called for the expression a - P where a and P is a real scalar number and an instance of polynomial, respectively.

Parameters:: other (SCALAR) – A real scalar number (the left operand) to be substracted by the polynomial.
Returns:: The result of subtracting a scalar value by the polynomial.
Return type:: MultivariatePolynomialSingleABC

Notes

If the left operand is not a real scalar number, the right-sided subtraction is not explicitly supported, and it will rely on the __add__() method of the left operand.
This operation relies on the negation of a polynomial and scalar addition

__sub__(other)#

Subtract the polynomial(s) with another poly. or a real scalar.

This function is called when:

two polynomials are subtracted: P1 - P2, where P1 and P2 are both instances of a concrete polynomial class.
a polynomial is added with a real scalar number: P1 - a, where a is a real scalar number.

Polynomials are closed under scalar subtraction, meaning that the result of the subtraction is also a polynomial with the same underlying multi-index set; only the coefficients are altered.

Parameters:: other (Union[MultivariatePolynomialSingleABC, SCALAR]) – The right operand, either an instance of polynomial (of the same concrete class as the right operand) or a real scalar number.
Returns:: The result of the subtraction, an instance of subtracted polynomial.
Return type:: MultivariatePolynomialSingleABC

Notes

Under the hood subtraction is an addition operation with a negated operand on the right; no separate concrete implementation is used.

__truediv__(other)#

Divide an instance of polynomial with a real scalar number (/).

Parameters:: other (Union[MultivariatePolynomialSingleABC, SCALAR]) – The right operand of the (true) division expression, a real scalar number.
Returns:: An instance of polynomial, the result of (true) scalar division of a polynomial.
Return type:: MultivariatePolynomialSingleABC

__weakref__#: list of weak references to the object (if defined)

static _gen_grid_default(multi_index)#

Return the default Grid for a given MultiIndexSet instance.

For the default values of the Grid class, see minterpy.Grid.

Parameters:: multi_index (MultiIndexSet) – An instance of MultiIndexSet for which the default Grid shall be build
Returns:: An instance of Grid with the default optional parameters.
Return type:: Grid

_match_dims(other)#

Match the dimension of two polynomials.

Parameters:: other (MultivariatePolynomialSingleABC) – An instance polynomial whose dimension is to match with the current polynomial instance.
Returns:: The two instances of polynomials whose dimensions have been matched.
Return type:: Tuple[MultivariatePolynomialSingleABC, MultivariatePolynomialSingleABC]
Raises:: ValueError – If the dimension of one of the polynomial instance can’t be matched due to, for instance, incompatible domain.

Notes

If both polynomials have matching dimension and domains, then the function return the two polynomials as they are.

_new_instance_if_necessary(new_grid, new_indices=None)#

Constructs a new instance only if the multi indices have changed.

Parameters:

new_grid (Grid) – Grid instance the polynomial is defined on.
new_indices (MultiIndexSet, optional) – MultiIndexSet instance for the polynomial(s), needs to be a subset of the current multi_index. Default is None.

Returns:

Same polynomial instance if grid and multi_index stay the same, otherwise new polynomial instance with the new grid and multi_index.

Return type:

MultivariatePolynomialSingleABC

_verify_operands(other, operation)#

Verify the operands are valid before moving on.

Parameters:

other (MultivariatePolynomialSingleABC)
operation (str)

Return type:

Tuple[MultivariatePolynomialSingleABC, MultivariatePolynomialSingleABC]

add_points(exponents)#

Extend grid and multi_index

Adds points grid and exponents to multi_index related to a given set of additional exponents.

Parameters:: exponents (np.ndarray) – Array of exponents added.
Returns:: New polynomial with the added exponents.
Return type:: MultivariatePolynomialSingleABC

property coeffs: ndarray#

The coefficients of the polynomial(s).

Returns:: One- or two-dimensional array that contains the polynomial coefficients. Coefficients of multiple polynomials having common structure are stored in a two-dimensional array of shape (N, P) where N is the number of monomials and P is the number of polynomials.
Return type:: numpy.ndarray
Raises:: ValueError – If the coefficients of an uninitialized polynomial are accessed.

Notes

coeffs may be assigned with None to indicate an uninitialized
polynomial. Accessing such coefficients, however, raises an exception. Many operations involving polynomial instances, require the instance to be initialized and raising the exception here provides a common single point of failure.

diff(order, **kwargs)#

Return the partial derivative poly. of given orders along each dim.

Parameters:

order (numpy.ndarray) – A one-dimensional integer array specifying the orders of derivative along each dimension. The length of the array must be m where m is the spatial dimension of the polynomial.
**kwargs – Additional keyword-only arguments that change the behavior of the underlying differentiation (see the respective concrete implementations).

Returns:

A new polynomial instance that represents the partial derivative of the original polynomial of the specified orders of derivative along each dimension.

Return type:

MultivariatePolynomialSingleABC

Notes

This method calls the concrete implementation of the abstract method _diff() after input validation.

See also

_diff: The underlying static method to differentiate the polynomial of specified orders of derivative along each dimension.

expand_dim(target_dimension, extra_internal_domain=None, extra_user_domain=None)#

Expand the spatial dimension of the polynomial instance.

Parameters:

target_dimension (Union[int, MultivariatePolynomialSingleABC]) – The new spatial dimension. It must be larger than or equal to the current dimension of the polynomial. Alternatively, another instance of polynomial that has a higher dimension, a consistent underlying Grid instance is consistent, and a matching domain can also be specified as a target dimension.
extra_internal_domain (numpy.ndarray, optional) – The additional internal domains for the expanded polynomial. This parameter is optional; if not specified, the values are either taken from the domain of the higher-dimensional polynomial or from the domain of the other dimensions.
extra_user_domain (numpy.ndarray, optional) – The additional user domains for the expanded polynomial. This parameter is optional; if not specified, the values are either taken from the domain of the higher-dimensional polynomial or from the domain of the other dimensions.

Returns:

A new instance of polynomial whose spatial dimension has been expanded to the target.

Return type:

MultivariatePolynomialSingleABC

Raises:

ValueError – If the target dimension is an int, the exception is raised when the user or internal domains cannot be extrapolated to a higher dimension. If the target dimension is an instance of MultivariatePolynomialSingleABC, the exception is raised when the user or internal domains do no match. In both cases, an exception may also be raised by attempting to expand the dimension of the underlying Grid or MultiIndexSet instances.

classmethod from_degree(spatial_dimension, poly_degree, lp_degree, coeffs=None, internal_domain=None, user_domain=None)#

Initialise Polynomial from given coefficients and the default construction for given polynomial degree, spatial dimension and \(l_p\) degree.

Parameters:

spatial_dimension (int) – Dimension of the domain space of the polynomial.
poly_degree (int) – The degree of the polynomial, i.e. the (integer) supremum of the \(l_p\) norms of the monomials.
lp_degree (int) – The \(l_p\) degree used to determine the polynomial degree.
coeffs (np.ndarray) – coefficients of the polynomial. These shall be 1D for a single polynomial, where the length of the array is the number of monomials given by the multi_index. For a set of similar polynomials (with the same number of monomials) the array can also be 2D, where the first axis refers to the monomials and the second axis refers to the polynomials.
internal_domain (np.ndarray or callable) – the internal domain (factory) where the polynomials are defined on, e.g. \([-1,1]^d\) where \(d\) is the dimension of the domain space. If a callable is passed, it shall get the dimension of the domain space and returns the internal_domain as an np.ndarray.
user_domain (np.ndarray or callable) – the domain window (factory), from which the arguments of a polynomial are transformed to the internal domain. If a callable is passed, it shall get the dimension of the domain space and returns the user_domain as an np.ndarray.

classmethod from_grid(grid, coeffs=None, internal_domain=None, user_domain=None)#

Create an instance of polynomial with a Grid instance.

Parameters:

grid (Grid) – The grid on which the polynomial is defined.
coeffs (numpy.ndarray, optional) – The coefficients of the polynomial(s); a one-dimensional array with the same length as the length of the multi-index set or a two-dimensional array with each column corresponds to the coefficients of a single polynomial on the same grid. This parameter is optional, if not specified the polynomial is considered “uninitialized”.
internal_domain (numpy.ndarray, optional) – The internal domain of the polynomial(s).
user_domain (numpy.ndarray, optional) – The user domain of the polynomial(s).

Returns:

An instance of polynomial defined on the given grid.

Return type:

MultivariatePolynomialSingleABC

classmethod from_poly(polynomial, new_coeffs=None)#

constructs a new polynomial instance based on the properties of an input polynomial

useful for copying polynomials of other types

Parameters:

polynomial (MultivariatePolynomialSingleABC) – input polynomial instance defining the properties to be reused
new_coeffs (ndarray | None) – the coefficients the new polynomials should have. using polynomial.coeffs if None

Returns:

new polynomial instance with equal properties

Return type:

MultivariatePolynomialSingleABC

Notes

The coefficients can also be assigned later.

has_matching_dimension(other)#

Return True if the polynomials have matching dimensions.

Parameters:: other (MultivariatePolynomialSingleABC) – The second instance of polynomial to compare.
Returns:: True if the two spatial dimensions match, False otherwise.
Return type:: bool

has_matching_domain(other, tol=1e-16)#

Return True if the polynomials have matching domains.

Parameters:

other (MultivariatePolynomialSingleABC) – The second instance of polynomial to compare.
tol (float, optional) – The tolerance used to check for matching domains. Default is 1e-16.

Returns:

True if the two domains match, False otherwise.

Return type:

bool

Notes

The method checks both the internal and user domains.
If the dimensions of the polynomials do not match, the comparison is carried out up to the smallest matching dimension.

integrate_over(bounds=None, **kwargs)#

Compute the definite integral of the polynomial over the bounds.

Parameters:

bounds (Union[List[List[float]], np.ndarray], optional) – The bounds of the integral, an (m, 2) array where m is the number of spatial dimensions. Each row corresponds to the bounds in a given dimension. If not given, then the canonical bounds \([-1, 1]^m\) will be used instead.
**kwargs – Additional keyword-only arguments that change the behavior of the underlying integration (see the respective concrete implementations).

Returns:

The integral value of the polynomial over the given bounds. If only one polynomial is available, the return value is of a float type.

Return type:

Union[float, numpy.ndarray]

Raises:

ValueError – If the bounds either of inconsistent shape or not in the \([-1, 1]^m\) domain.

Notes

This method calls the concrete implementation of the abstract method _integrate_over() after input validation.

See also

_integrate_over: The underlying static method to integrate the polynomial instance over the given bounds.

make_complete()#

returns a possibly new polynomial instance with a complete multi index set.

Returns:: completed polynomial, where additional coefficients setted to zero.
Return type:: MultivariatePolynomialSingleABC

Notes

the active monomials stay equal. only the grid (“basis”) changes
in the case of a Lagrange polynomial this could be done by evaluating the polynomial on the complete grid

property num_active_monomials: int#

The number of active monomials of the polynomial(s).

The multi-index set that directly defines a polynomial and the grid (where the polynomial lives) may differ. Active monomials are the monomials that are defined by the multi-index set not by the one in the grid.

Returns:: The number of active monomials.
Return type:: int

partial_diff(dim, order=1, **kwargs)#

Return the partial derivative poly. at the given dim. and order.

Parameters:

dim (int) – Spatial dimension with respect to which the differentiation is taken. The dimension starts at 0 (i.e., the first dimension).
order (int) – Order of partial derivative.
**kwargs – Additional keyword-only arguments that change the behavior of the underlying differentiation (see the respective concrete implementations).

Returns:

A new polynomial instance that represents the partial derivative of the original polynomial of the specified order of derivative and with respect to the specified dimension.

Return type:

MultivariatePolynomialSingleABC

Notes

This method calls the concrete implementation of the abstract method _partial_diff() after input validation.

See also

_partial_diff: The underlying static method to differentiate the polynomial instance of a specified order of derivative and with respect to a specified dimension.

property spatial_dimension#

Spatial dimension.

The dimension of space where the polynomial(s) live on.

Returns:: Dimension of domain space.
Return type:: int

Notes

This is propagated from the multi_index.spatial_dimension.

property unisolvent_nodes#

Unisolvent nodes the polynomial(s) is(are) defined on.

For definitions of unisolvent nodes see the mathematical introduction.

Returns:: Array of unisolvent nodes.
Return type:: np.ndarray

Notes

This is propagated from from self.grid.unisolvent_nodes.